Solar Dryer

Using a clothesline can save energy and extend the life of your clothing.  The sun also naturally brightens white clothing eliminating the need to use bleach.

For more design tips and contact info click Home Energy Efficiency

Our Favorite House Plant

Fiddle leaf ficus, Ficus Lyrata, is by far the favorite house plant at Forrest Glover Design.  The big leaves look great in the bushy form but also make a spectacular tree when pruned up.

Home Decor Ideas

Occupancy Sensor Switches

I recently installed occupancy sensors in my pantry, workshop, bathroom closet, and upstairs bathroom.  I don't normally leave a room with the lights on, but it has been a pleasant change to have the lights turn on and off automatically.  Who knew such a quick and easy upgrade would be so exciting?  Occupancy sensor switches can be install where the current light switch is in about ten minutes.  Please be sure to work safely around electricity and call an electrician where required by law.

If you or your children have a habit of leaving the lights on, you can save a lot of energy by installing these simple switches.  Closets, bathrooms, laundry rooms, garages and children's rooms are great places to install occupancy sensors.  Sensor are available in many price points and options.  Most include adjustable settings for length of time the light is on.  Others include dimmers and on/off override switches.  There is a great selection of switches from $15 - $50.  Dimming an incandescent bulb by just 10 percent can save up to 20 percent on energy and greatly increase the life of the bulb.

Home Energy Savings

Metal Roofing

Though metal roofs have a great amount of embodied energy and cost more up front.  There are many advantages to them.

• Serviceable for 50+ years
• Recyclable and many are made from up to 95% recycled materials
• Superior energy efficiency in both heating and cooling seasons
• Perfect for rain catchment systems
• Fire resistant
• Provide maximum wind resistance
• Leak resistant
• Solar panels can be installed on them without drilling into the roof deck
• Beautiful and complementary with many architectural styles

Home design for fire protection

Advanced Framing

Optimum Value Engineering (OVE) or advanced framing is a framing technique developed in the 1970s.  It can reduce the amount of lumber used for framing by 20 percent and preforms better thermally.  

• Instead of 2x4s 16in on center, the building is framed with 2x6s 24in on center.  This allows for more insulation and less thermal bridging through the studs.
• Corners are framed with two studs rather than four.
• Headers eliminated in non-load bearing walls and sized according to their specific load in other walls.
• The foundation generally calls for poured slab on grade to reduce wood for first floor framing.
• Floors are framed with I-joist.
• Roofs are built with trusses, eliminating a significant amount of wood used in conventional framing.
• Insulation rigid foam is applied to the exterior plywood to further reduce thermal bridging

When building a new home or adding an addition, consider advanced framing to save framing cost and create a space that is less expensive to heat and cool.

Poor framing technique:

For more information or contact info visit Forrest Glover Design - Home Remodeling.

Natural Swimming Pools

 

 

350 Home & Garden Challenge - May 12 & 13

Join your neighbors in Sonoma County to save water and energy, grow food, and build community.  Removing your thirty lawn can save more water than replacing all your interior fixtures.  Plant vegetables, herbs, or create a beautiful native garden.  Daily Acts has more information about the successes of the challenge since 2010.  Some actions they suggest:

• convert your lawn (or patio/balcony) to grow food
• plant a fruit tree
• create an herb garden
• grow a row for a local food bank
• start a worm bin or compost
• install low flow
• set up a greywater system

• harvest rainwater
• switch to drip irrigation
• hang a clothes line
• conduct a home energy audit
• unplug and tune-in to Nature
• have a block party and share stories
• help a neighbor meet the 350 Challenge

Forrest Glover Design  has recently joined forces with a wonderful native garden design and landscaping company to create stunning, earth friendly, and low maintenance gardens for your home or business.

Oak and Steel

Understanding Window Energy Ratings

Buying new windows for your home can be expensive and intimidating.   Understanding the Energy Performance Ratings can make the process less painful while adding comfort and energy savings.  There are four main measurements to look for when shopping for new windows: U-value, solar heat gain coefficient, visible transmittance, and air leakage.  But what do these numbers mean?

U-Value is a measurement of the heat flow through the window.  It can be compared to the R-value (resistance) in insulation though it is the opposite.  A lower U-value means less heat is transmitted through the window.  U-value = 1/R-value.  A window with a U-value of 0.33 would have a R-value of 3.  A lower number provides more insulation.

Solar Heat Gain Coefficient is the ratio of solar heat gained by the window compared the amount of solar energy hitting the window's surface.  The measurement is a number between 1 and 0.  A SHGC of 1 indicates 100 percent solar gain while 0 indicates no solar gain.  It is best to develop a window strategy with different SHGC for different windows.  West-facing should be avoid but when they are used,  the SHGC should be very low to avoid over heating the home in the afternoon.  South-facing windows should have a high SHGC to allow low angle winter sunlight in to heat the home passively.

Visible Transmittance is the measure of how much light the window transmits.  The number is also between 0 and 1.  The higher the number, the more light allowed to pass through the window.

Air Leakage is the measure of cubic feet of air leakage per minute per square foot of window.  Windows with air leakage less than 0.3 cfm/ft2 is recommended.  Casement windows generally preform better than sliding windows in air leakage while fixed windows perform the best.

"Air leakage siphons about half of an average home's heating and cooling energy to the outdoors each year.  Air leakage through windows is responsible for much of this loss."  -Paul Fisette Energy-Efficient Building

Spring Has Sprung

When pruning flowering trees in spring, bring some of the branches inside and place in water.  The heat in your home with force the branches to bloom.  An easy way to celebrate the changing of seasons and bring beauty inside.

Shipping Container Conversions

Sustainable Residential Remodeling - Sonoma

Simple Savings - Window Treatments

Ideally after your retrofit is complete, your house will have dual paned windows with UV filtering glass in the right places.  Window replacement is quite expensive and is generally the last step in a phased remodel.  The whole low hanging fruit and bang for your buck idea.  In the meantime, there are first steps to help you stay comfortable and save energy.

Well designed window treatments can go a long way to cutting your energy and saving you money.  Heat moves to cold, so depending on the situation or time of year, you will use different strategies.  Thermal lined drapes or roman shades are best for keeping the heat in during the winter.  Open them up during the day to let the sun warm the room and close them tight after the sun goes down.  There are special thermal lining products on the market and an additional flannel interlining can increase the insulation.  In the summer, it is best to keep the sunlight off of the window rather than block it once it in inside.  Outdoor solar roller shades, permanent overhangs, or deciduous plants can help block the summer heat when well designed.

A Case for Clay

Indoor air quality is often overlooked when people think of green building.  Since most people spend 90% of there day indoors, it is important to consider.  VOCs (Volatile Organic Compounds) are chemicals with low boiling points that allow them to be released readily into the air at room temperature.  VOCs can cause many health problems including headaches, asthma, allergies, and even cancer with prolonged exposure.  Young children and infants are at greater risk than those with fully developed immune systems.  VOCs are in many interior products and finishes including paints, carpet, vinyls, and adhesives.  Think of the smell of wet paint or a new car.

Many paint companies have been working to reduce or omit the use of VOCs in their products.  Clay based products can be an alternative to conventional paints.  They are healthy and beautiful while bringing another natural product into your home giving you greater connection to the natural world.  Clay based finishes generally come in two different forms.  Bioshield offers clay paints in many beautiful colors.  These can be painted directly onto a matte surface such as existing paint or drywall.  American Clay is a natural plaster product.  (Sorry iPad users, the website uses Flash!)  It comes in four finishes from matte to a beautifully smooth finish called Porcelina.  They work with local companies and applicators who can mix a multitude of custom colors.

Paint is an easy way to change interiors and is often what homeowners change first.   Look for healthy alternatives for you and your family.  Clay being only one of the options currently on the market.

Outdoor Living

Increase you living space without a major remodel.  In Northern California, you can live at least 6 months outside without threat of rain.  Outdoor living can be as simple as a couple of lounge chairs.  Our favorite is a dining area for beautiful dinner parties and al fresco lunches with friends and family.